DBR10 and MG10XU set
DBR10 and MG10XU set
3960 d ფასდაკლებაProfesional audio system set
DBR10 specifications
| Speaker type | 2-way, Bi-amp powered speaker, Bass-reflex type |
| Frequency range (-10dB) | 55Hz – 20kHz |
| Nominal coverage | H- 90° V- 60° |
| LF Component | Diameter:10" cone, Voice Coil:2", Magnet:Ferrite |
| HF Component | Diaphragm:1", Type: 1" throat compression driver, Magnet:Ferrite |
| Crossover | 2.1kHz: FIR-X tuning™ (linear phase FIR filter) |
| Output power | Dynamic:700 W (LF: 500 W, HF: 200 W) / Continuous: 325 W (LF: 260 W, HF: 65 W) |
| Maximum output level | 129dB SPL |
| I/O connectors | INPUT1: Combo x1, INPUT2: Combo x 1 + RCA pin x 2 (Unbalanced), OUTPUT: XLR3-32 x 1 (CH1 Parallel Through or CH1+CH2 Mix) |
| Processors | D-CONTOUR: FOH/MAIN, MONITOR, OFF |
| Heat dissipation | Fan cooling, 4 speeds |
| Power requirements | 100 V, 100-120V, 220-240 V, 110/127/220V (Brazil), 50/60Hz |
| Power consumption | 60W(1/8 Power Consumption), 18W(Idle) |
| Cabinet material | Plastic |
| Finish | Black |
| Width | 308mm |
| Height | 493mm |
| Depth | 289mm |
| Weight | 10.5 kg |
| Accessories | BBS251, BCS251, BWS251-300, BWS251-400 (Optional Speaker bracket) |
MG10 XU specfications
- 10-Channel Mixing Console
- Max. 4 Mic / 10 Line Inputs (4 mono + 3 stereo)
- 1 Stereo Bus
- 1 AUX (incl. FX)
- “D-PRE” mic preamps with an inverted Darlington circuit
- 1-Knob compressors
- High-grade effects: SPX with 24 programs
- 24-bit / 192kHz 2in / 2out USB Audio functions
- Works with the iPad (2 or later) through the Apple iPad Camera Connection Kit / Lightning to USB Camera Adapter
- Includes Cubase AI DAW software download version
- PAD switch on mono inputs
- +48V phantom power
- XLR balanced outputs
- Metal chassis
- Dimensions(W×H×D): 244 mm x 71 mm x 294 mm (9.6"x 2.8"x 11.6")
- Net Weight: 2.1 kg (4.63 lbs.)
| On-board processors | SPX algorithm: 24 programs, PARAMETER control:1, FOOT SW:1 (FX RTN CH on/off) |
| Phantom power | +48 V |
| Digital I/O | USB Audio Class 2.0 compliant, Sampling Frequency: Max 192 kHz, Bit Depth: 24-bit |
| Input Channels | Mono[MIC/LINE]- 4 Stereo[LINE]- 3 |
| Output Channels | STEREO OUT-2 MONITOR OUT-1 |
| AUX SEND-1 PHONES-1 | |
| Bus | Stereo: 1 |
| Input Channel Function | PAD-26 dB (Mono) |
| COMP- 1-knob compressor Threshold: +22 dBu to -8 dBu, Ratio: 1:1 to 4:1, Output level: 0 dB to 7 dB | |
| HPF-80 Hz, 12 dB/oct (Mono) | |
| EQ HIGH- (Mono) Gain: +15 dB/-15 dB, Frequency: 10 kHz shelving | |
| EQ MID- Gain: +15 dB/-15 dB, Frequency: 2.5kHz peaking | |
| EQ LOW- (Mono) Gain: +15 dB/-15 dB, Frequency: 100 Hz shelving | |
| PEAK LED- LED turns on when post EQ signal reaches 3 dB below clipping | |
| Level Meter- 2 x 7 -segment LED meter [PEAK, +6, +3, 0, -3, -10, -20 dB] | |
| Total harmonic distortion | 0.02 % @ +14dBu (20 Hz to 20kHz), GAIN knob: Min, 0.003 % @ +24dBu (1kHz), GAIN knob: Min |
| Frequency response | +0.5 dB/-0.5 dB (20 Hz to 20 kHz) , refer to the nominal output level @ 1 kHz, GAIN knob: Min |
| Equivalent input noise | -128 dBu (Mono Input Channel, Rs: 150Ω, GAIN knob: Max) |
| Residual output noise | -102 dBu (STEREO OUT, STEREO LEVEL knob: Min) |
| Crosstalk | -83 dB |
| Power requirements | PA-10 (AC 38 VCT, 0.62A, Cable length = 3.6 m) or equivalent recommended by Yamaha |
| Power consumption | 22.9 W |
| Width | 244 mm |
| Height | 71 mm |
| Depth | 294 mm |
| Weight | 2.1 kg |
| Accessories | AC Adaptor, Owner’s Manual |
